BUV-002-16W BUBBLE 2gpm UV System (16W)

Description

• Safe UV disinfection technology
• Efficient disinfection by High UV dose, bactericidal rate is up to 99/99%*
• Sanitization and safety comes from polishing SUS304 chamber and quartz sleeve high transmittance
• No effect of taste and smell into water
• No harmful material into water
• Fully equipped with accessories for installation
• 9000 hours simple and stable operation**
• Small footprint, low weight and low power consumption
• Sound-light alarm timely indicate malfunction

*At the condition of not exceeding UV sterilizer rated water flow

**UV lamp accumulate working time is 9000 hours

Notice: This UV sterilizer assumes certain water quality parameters to be met for proper operation. If the source water does not meet the criteria listed on the left, pretreatment has to be considered.

Installation Tips

• Both horizontally and vertically installation are acceptable, electrical wire should be over water tube
• Filtrated source water is required to insure disinfection efficiency
• System powered off before maintenance
• Change UV lamp on a regular 1-year or 9000 hour accumulated working time preventative maintenance program, whichever come first
• Keep UV sterilizer on mostly low quality of source water minimize disinfection efficacy
• Suggest to clean quartz sleeve on a regular 1 year preventative maintenance program

Optimal Source Water Condition

• Total iron ≤ 0.3ppm
• Hydrogen sulfide ≤ 0.05ppm
• Suspended solid ≤ 10ppm
• Mn ≤ 0.05ppm
• Hardness ≤ 120mg/L
• Chroma ≤ 15
• Turbidity ≤ 5NTU
• Temperature 2˚C-40˚C