EV979722 EVERPURE Kleensteam II Twin System
Service Flow Rate
Maximum 2.5 gpm (9.5 Lpm) single cartridge
Maximum 5.0 gpm (18.9 Lpm) dual cartridge
Pressure Requirements: 10 – 125 psi (0.7 – 8.6 bar), non-shock
Maximum Water Temperature at Inlet: 100°F (38°C)
Overall Dimension
25.5″ H x 20.5″ W x 7″ D
(64.7 cm x 52.0 cm x 17.7 cm)
Allow 2 1⁄2″ (6.35 cm) clearance below the cartridge for easy cartridge replacement
Inlet Connection: 3/4″ FNPT
Outlet Connection: 3/4″ FNPT
Electrical Connection: None required
Alkalinity Range: 2 to 12 grains per gallon
Application: Commercial Steam, Foodservice Steamer, Combi Oven
Share this:
Description
EVERPURE’S SECOND GENERATION OF TOTAL WATER TREATMENT SYSTEM FOR STEAM APPLICATIONS
- Sophisticated Hydroblend compound prevents limescale formation in high temperature steam applications
- A total system delivering high quality filtered water with cleaning and deliming capabilities
- Filters incoming water to improve the performance, maximize energy efficiency and increase the life of steam equipment
- New dual cartridge design provides enhanced performance for low or high flow capacity steamers and flexibility for expanding to meet future needs
- Reduces chlorine-induced corrosion
- System is simple to install, operate and maintain
- The Kleensteam II Twin System is shipped with two 7CB5 cartridges and no filter head plug
- Longer lasting SS-10 Cartridge is more effective in higher alkalinity/hardness/TDS/temperature installations
- ScaleStick is NSF® Certified under NSF/ANSI Standard 42 for materials
- Easy deliming with Everpure ScaleKleen, which is fed directly into the boiler through the SR-X Bowl without use of hazardous chemicals or special piping
Additional information
| Brand |
|---|